magnetic mill (molino magnetico) magnetic repellency unit

Magnetic repellency

magnetic repellency is the compression and extension of the magnetic field to resulting of confronting magnetic fields to the same polarity what looking back to the original form . Author Juan Carlos Aviles Moran (student magnetologia)

[[1]]

.

• In 2009 , The new investigation of Juan Carlos Aviles Moran of the perpetual moving body using magnetic repellency Invented: October 27, 2009 (To give form to the magnetic field using metamateriales to create a continuous impelling magnetic field; to maximize magnetic repellency and to diminish resistance using Metamateriales, are created the artificial magnetic monopole what gives like result continuous displacement; Positive feedback or positive refeeding of the displacement by magnetic repellency) the magnetic fields that interact with other magnetic fields of equal polarity do not undergo variants in their temperature that is to say, maintain stable or constant a temperature. we remember does not exist friction in this rotating system therefore there is lost of heat nor no increase of heat The kinetic one can be understood better with examples than they demonstrate how this one becomes of other types of energy and to other types of energy. For example a cyclist wants to use the chemical energy that she provided his food to him to accelerate his bicycle at a chosen speed. Its rapidity can stay without much work, by the air resistance and friction. The energy turned into an energy of movement, well-known as kinetic energy but the process is not completely efficient and the cyclist also produces heat. Taking as an example we are going to compare the obtained kinetic energy of the cyclist when pedalear; comparing it with the push generated by the shock of magnetic fields of equal polarity; (the magnetic fields that interact with other magnetic fields of equal polarity do not undergo variants in their temperature that is to say, maintain stable or constant a temperature. we remember does not exist friction in this rotating system therefore there is lost of heat nor no increase of heat). Being therefore the kinetic energy obtained by the push of the magnetic repellency it is an efficient process. Unit of Magnetic repellency (U.R.M Unit of magnetic repellency is the insertion, compression and extension " Continuous" of magnetic fields of equal polarity; result of " Confront" artificial magnetic poles; Artificial magnetic Monopolo is a magnet or magneto to which part of its magnetic field within an alloy has been contained him or alternating layers of Metamateriales leaving it of artificial way with a single active magnetic polarity).

References and external articles

http://en.wikipedia.org/wiki/Perpetual_motion perpetual motion machine of the first kind . perpetual motion machine of the second kind (An exception is the new investigation of Juan Carlos Aviles Moran of perpetual motion using magnetic repellency and artificial magnetic monopole )

http://www.inventnow.org/patent_certificate/?ph=150ba93b9322a3f3d154723e954c9dd0

http://www.inventnow.org/patent_certificate/?ph=f72b278edda3d16a74d3af9b03eb2449

Magnetic Repellency Unit

Magnetic Repellency Unit (M.R.U) created by Juan Carlos Aviles Moran.

definition: Unit of magnetic repellency "or" Magnetic repellency unit is the insertion, compression and rebound "Continue" in the same polarity magnetic fields, the result of "confrontations" artificial magnetic monopoles. Author: Juan Carlos Aviles Moran.

 URM overview of the project (unit of magnetic repellency) 

system called magnetic repellency unit taking into account certain parameters that they had not been given much earlier: 1) The magnetic repellency when confronted result in the displacement of lower body mass. 2) Using a ring or circle which is a geometric shape that manages power efficiently we can manage the repellency directing contained within the ring thus creating a continuous motion as if inside the ring there is a succession of artificial magnets either individual or a single piece to be of equal magnetic polarity to reject or repel the magnets placed at the ends of a shaft or rotor inside the ring will be an imbalance or shock of the same polarity magnetic fields, this transfer of a magnet to another create a movement. 3) for the above possible should be taken into account that there will only be in the ring is magnetic repellency must shield or insulate the sides and edges of attraction to achieve this absolute repellency in the basket 4) in the middle of the rotor shaft or a torque give strength and speed which depends on the mass of the alloy and artificial magnets. 5) the force of torsion will be used to rotate or boost the shaft of a generator and thus generate free electricity and other energy without consuming it is for MI repellency boundless energy. My views and opinions are personal and although the issue of magnetic repellency unit in its infancy I published on the internet in an attempt to work with an alternative system of electric generation that deserves to be researched and developed. I firmly believe that magnetic repellency unit will be in the very near future a reality that is why I promote that there is still much we do not know better alloys and insulators and since the youth is the future I leave you all to the proposal and discuss make their own guesses. I ask you again to upset analyze my magnetic repellency unit (MRU) in a thorough and impartial, I'll tell you certain parameters that govern my URM dispocicion or angle of the collision between the same polarity magnetic fields is critical in my URM dispocición as well as the shielding or insulating magnetic ie these redirect the rotor, there are many variables to consider, such as artificial alloy magnets in their armor either rotor or stator shapes and surfaces of the magnets are reflected in its magnetic repellency rather than on its magnetic attraction. And do not forget the active unipolarity is an important factor although it seems easy to the MRU is a constant power imbalance repellency than willing to work the right way. PLEASE discuss this project with friends URM faculty and professionals. Remember I only require the U.R.M. that enhances or rotate the shaft of a dynamo The MRU is exactly like the traditional mills used just that URM constant repellency to operate.

magnetic repellency unit name him that way because they are united in a common design of geometric shapes and the physical effects of repellency long time ago trying to create a perpetual motion but it is until you discover the shielding has been possible this is to say Artificial magnets magnetic fields give a boost magnified in proportion to their alloy if we add the appropriate shielding to prevent distortion or deformation of unidirectional path repellency (CRM cascade of magnetic repellency) continues perpetual motion is achieved.

= Magnetic field increased artificially magnified optimal alloys shield the magnets and interrupt lines drag force between the magnets

the shield should have a higher density to block the magnetic field of attraction of the magnets so it creates a cascade of magnetic repellency is a path as a highway for the axis magnets to be repelled any bad position in the ring equals a road bump in which no shaft magnets rotate

the shield should be proportional to the magnetic field even when confronted remember attraction magnets of the same polarity and repel at the same time trying to attract the attraction is to be removed

If you can create a continuous movement to generate electric power as knowing if you can I have my project of magnetic repellency unit and if If you can create a perpetual motion machine. Author: Juan Carlos Aviles Moran.